|
CELLUSOFT |
Biopolishing
is an enzymatic process for finishing of cellulosic materials
such as cotton, linen, viscose, ramie and their blends with
synthetic fibres. It is a process that removes fuzz and
eliminates pilling in cellulosic garments. The enzyme performs a
controlled hydrolysis of the cellulosic fibres in order to
modify the fabric surface. This keeps the garments looking new
even after repeated washes. It effects are permanent, without
involving chemical coating of the fibre.
Application:
CelluSoft is well suited for Biopolishing of Gabardine trousers,
Shirts (Garment dyed and Fabric dyed) and other garments made of
cellulosic materials.
Enzyme Dosage : 0. 4% -8% O.W.G (on weight of garment)
Treatment Time : 45-90 minutes.
pH : 4.5-5.5
Optimum pH : 4.8
Occurrence : Liquid
Nature : Acid.
Temperature : 48 – 55C.
The Enzyme treatment should be terminated by a thorough rinse
and detergent wash – off followed by treatment with Amino
Silicone /Cationic softener which will give Unmatched Softness.
Storage: Generally, at a storage temperature of 25C,Cellusoft
maintains the declared activity. A temp above 30C should be
avoided.
Advantage of enzyme washing: Soft handle and attractive
clean appearance is obtained without severe damage to the
surface of yarn. Inexpensive, low-grade fabric quality can be
finished to a top quality product by the removal of hairiness
fluff and pills, etc. Simple process handling and minimum
effluent problem. Better feel to touch and increased gloss or
luster. Prevent tendency of pilling after relatively short
period of wear. Can be applied on cellulose and its blend. Due
to mild condition of treatment process is less corrosive. Fancy
Colour – flenced surface can be obtained without or a partial
use of stone. More reproducible effect can be obtained. It
allows more loading of the garment into machines. Environmental
friendly treatment. Less damage to seam edges. Wear and tar of
equipment is minimum due to lesser use or absence of stones. Use
of softener can be avoided or minimized. Easy handling of floor
and severs as messy sludge of stones does not interfere. Due to
absence of stone, labour intensive operation of stone removal is
not required. Homogenous abrasion of the garments. Puckering
effect can be obtained. Problem of Pumice Powder contamination
on garment is not there.
Disclaimer:
The above information is correct to the best of our knowledge;
however the recommendations are without any engagement on our
part as they depend upon the conditions of usage, which vary
from plant to plant.
|
|
Novaquest-DMS
|
Novaquest-6010
|
Quest
|
Scourtex-APLF
|
Klinol-HP
|
Scourtex-SPLF
|
Klinol
|
Surfactol-LF
|
Ecosoft
|
Cellusoft |
| |
|
|
